When looking to upgrade your maintenance workshop or garage its definitively worth looking at this project as an example. Its simple, cost effective and produces great results in organisation, aesthetics and storage capacity. This is the way we like a Polstore Fit to run. The equipment is manufactured and assembled in 5 weeks with the installation date booked in the 6th week. Our fitters arrive with the equipment with no third party invlovement - no risk of damage, on time (not too early, not too late) and our client kept informed. The client had no fork lift so the truck has a tail lift, making off load safe and efficient. All the equipment is well wrapped and palletised anyway but we manage all that including removal of all packaging and waste once we are done.
The Polstore maintenance workbench needed to be fitted in between the 2 walls with drawer storage cabinets underneath. We specified a galvanised steel work surface 40mm which will eventually accommodate a mechanics vice. Hard wearing and robust. The cabinets are positioned underneath and fixed using M10 fixings and inserts. The overall weight of the bench is heavy duty and industrial. The drawer cabinets are from our standard range with 100% extension drawer 200kg rating per drawer. We also added in anti slip foam inlays to each drawer giving protection to tools and items stored within. The work surface is cut to size mm and jointed!
The Polstore Storage Cupboards along the wall are 2000mm high - due the the 1st floor construction the client had already made good the electrics, self leveled the floor and cleared over head services. So when we arrived all was clear and ready to go - this is a major help for us when the client is prepared and speeds up the installation process. Now because of the new floor and space restriction we are concerned about damaging it. The Polstore way is to bring blankets - we place these under the units and then slide the storage cupboards into position. No floor damage! All units are then leveled and locking mechanisms checked.
So a job like this took a team of 2 operatives 4 hours - we get some help with the tools we use - another part of our business is selling tools, fixings and supplies. So we like to use FESTOOL where we can. Making those cuts and carpentry work very efficient on site.